Oil Alert offers optional accessories to customize your oil detection system. We’re happy to help with product selection and system configuration for your application.

Power Supply: PSW-3
DC power supply ideal for large installations operates up to 18 Oil Alert detectors (wiring instructions included). Flashing LED indicates power to Oil Alerts. Internal self-recharging battery provides backup power to the system in case of line power failure.
Specifications: Features large screw-type terminal blocks inside the enclosure for convenient wiring. Connection to Oil Alerts is made by means of wire nuts. Short circuit, overload and overvoltage protected. 5’ wire duct included. Power cord included – unit may also be hardwired in. Rugged, attractive wall-mounted enclosure dimensions: 12.25”H x 8.5”W x 5.25”D. 9VDC output. UL Listed input transformer.

Power Relay: PR-WM
Used to control high powered equipment such as pumps, motors and solenoids from an OAX-5 Oil Alert detector. Power relay unit is surface wall mounted in a NEMA 4X non metallic enclosure. Unit will power up to 2 Oil Alert model OAX-5 detectors.
Specifications: Input is normally open contact from OAX-5. UL Listed input transformer. Output: SPDT relay contact (Form C) rated up to 120 VAC @ 20 amps. Features large screw-type terminal blocks inside the enclosure for convenient wiring. Connection to Oil Alerts is made by means of wire nuts. Power ON LED and Relay Activated LED. Enclosure dimensions: 8”H x 4.5”W x 2.75”D.

Remote Alarm: RA-WM
Used for additional remote indication of liquid leakage. Compatible with OAX-5 Oil Alert detectors and all Series 2100 Monitor panels. Unit is surface wall mounted.
Specifications: Input is normally open contact from OAX-5. UL Listed input transformer. 10mm LED indicator and 85db audible alarm with silence switch. Dimensions: 6”H x 3”W x 2”D.

Remote Alarm: RA-OD
Used for additional remote indication of liquid leakage. Unit can be mounted indoors or outdoors for remote notification of an alarm. Compatible with OAX-5 Oil Alert detectors and all Series 2100 Monitor panels. Unit is surface wall mounted.
Specifications: Operates on 12VDC, UL Listed plug in transformer included. Loud 120db low tone siren draws only 700mA of current. Blue color strobe. (Other colors available upon request, contact us for details) Dimensions: 7”H x 5.75”W x 4.5”D.

Auto-Dialer: AD-6
State-of-the-art automatic telephone dialer and annunciator designed for use with various alarm devices. Automatically dials a sequence of user programmed phone numbers (maximum of eight) and provides a custom voice message indicating the emergency condition which exists at the dialer location. Compatible with the OAX-5 Oil Alert detector and all Series 2100 Monitors. Upon activation it locally announces the Alert Condition for 30 seconds. If the Alarm Cancel switch is not pressed it commences dial-out, calling each of 8 phone numbers sequentially. Auto-dialer also accepts calls and provides status of three alert conditions: temperature, power status, battery level.
Specifications: Devices connect to the AD-6 with low voltage pairs of wire. Three individual inputs monitor groups of contact operating devices. Accepts programming for high and low temperature limits (single temperature sensor included). Included rechargeable backup battery provides power for 15 hours if AC line fails. Tamper resistant with optional password protection on dial-out numbers. Enclosure dimensions: 11.25”H x 7.25”W x 4.5”D.
Wire & Cable
Type F Cable: Signal/Power wire for use with all Series 2100 systems.
- 3 conductor
- Stranded
- Shielded
- #22 AWG
- Vinyl jacket
Type B Cable: Signal/Power wire for use in power runs and signal runs less than 500’.
- 2 conductor twisted pair
- Stranded
- #22 AWG
- Vinyl jacket
Power Wire #18: Power wire for use in power runs and signal runs between 500’ and 2500’.
- 2 conductor twisted pair
- Stranded
- #18 AWG
- Vinyl jacket