Accessories
PS-3 Power Supply
DC power supply eliminates batteries in Oil Alert detectors - ideal for large installations where accessibility to Oil Alert is inconvenient or battery operation is not acceptable. Operates up to 24 Oil Alert detectors, wiring instructions furnished. Internal self-recharging battery provides back up power to system in event of line power failure or power cord removal. UL Listed input transformer. Flashing LED indicating power to Oil Alerts. Large screw-type terminal blocks at rear of enclosure for convenient wiring. Connection to Oil Alerts is made by means of wire nuts. Short circuit, overload and over voltage protected. Rugged attractive enclosure 8-1/2”W x 9-1/2”D x 2-1/2”H.
AD-5 Auto-Dialer
Auto-Dialer can call up to 4 phone numbers, including pagers for off site indication of activating Oil Alert detectors. Requires standard phone line with RJ-11 jack and power outlet. The AD-5 can be activated by the OA-5 or any Series 2100 Monitor, via relay input. Rugged attractive enclosure 8-1/2”W x 9-1/2”D x 2-1/2”H.
SM-2 Sensing Modules
Two pack of replacement Oil Alert Sensing Modules.
9V Battery
Industrial type, non-rechargeable, 9V Alkaline battery.
RA-WM Remote Alarm
Used for additional remote indication of liquid leakage. Compatible with OA-5 Oil Alert Detectors. Unit is surface wall mounted. Dimensions- 6"H x 3"W x 2"D . UL Listed input transformer. Input- Normally Open Contact from OA-5. 10mm LED indicator and 85db Audible Alarm w/silence switch.
Voltage Module
Rather than battery power it may be desirable to power Oil Alerts with your 12 or 24v AC or DC (or any voltage in between). A Voltage Module will be required for each detector in this application. The Voltage Module snaps into the Oil Alert and will convert your voltage to 9vdc as required. Model- VOLTAGE MODULE.
PR-WM Power Relay
Used to control high powered equipment such as pumps, motors and solenoids from an OA-5 Oil Alert Detector. Unit is surface wall mounted in a NEMA 4x nonmetallic encloser. Dimensions- 5.5" H x 3" W x 2.6" D. Unit will power up to 2 Oil Alert detectors Model OA- 5. UL Listed input transformer. Input:- Normally Open Contact from OA-5. Output: SPDT Relay Contact ( Form C) Rated - 120VAC @ 20 Amps. Large screw-type terminal blocks inside enclosure for convenient wiring. Connection to Oil Alerts is made by means of wire nuts. Power ON LED, Relay Activated LED.
Wire and Cable
TYPE “D” cable: Signal/Power wire - 3 conductor, stranded #22 AWG. with vinyl jacket. 0.150” O.D. For use with all Series 2100 systems.
TYPE “B” cable: Signal/Power wire - 2 conductor Twisted pair, stranded #22 AWG. with vinyl jacket. For use in PS-3 power runs and RA-WM signal runs less than 500’.
POWER WIRE #18: Power wire - 2 conductor twisted pair, stranded #18AWG. with vinyl jacket. 0.226” O.D. For PS-3 power runs and RA-WM signal runs between 500’ and 2500’.
SERIES 2100: Monitored systems
The Series 2100 is an early warning leak detection system utilizing the latest line of Dorlen Products remote monitors and compatible OA-2100 Oil Alert detectors. All Series 2100 Monitors Monitor and Power the connected OA-2100 Oil Alerts.
The easily installed system is made up of only 3 separate components, 1 Monitor (4 models available), up to 12 Oil Alert detectors, and Dorlen type "D" interconnect cable. Each system is characterized by the monitor used. When one or more Oil Alert detects liquid leakage it will activate its internal audible alarm and signal the monitor.
The monitor will then activate providing an audible alarm, red flashing lamp, LED indication of activated Oil Alert(s) and transfer a dual set of isolated relay contacts. The Oil Alerts may be located up to 2500 feet from the monitor. Monitors are available in both shelf or wall mount configuration. The below table summarizes the Series 2100 product line.
- Monitors will monitor and power the connected Oil Alerts (Oil Alert Model OA-2100).
- Upon Oil Alert activation, monitors sound audible alarm, flashing red lamp and LED indication of which Oil Alert has activated.
- Monitors are equipped with automatic internal battery back-up in case of line power failure, system will remain monitoring for up to 4 days without AC power... Battery self recharges upon AC return.
- Monitors are equipped with 2- SPDT isolated relay contacts which will transfer upon any Oil Alert activation for customer use in signaling existing security panels or other equipment. (Relays rated at 1 amp,28VDC).
- Extremely simple installation... Normally carried out by company maintenance personnel with instructions furnished. ALL hardware included.
- Everything needed to make your system functional and easy to install. Ultra-reliable performance; All Monitors come with a 5 year Warranty.
